PropOne vs. PropSpeed – Which Has the Best Propeller Antifouling Technology

Selecting the correct anti-fouling product for your propeller and running gear has become a different process. The EPA has developed strict regulations for anti-fouling paints and there are few other alternatives that provide both results and longevity. Today’s anti-fouling products can be divided into two categories. The first category is paint that contains biocides that leach through the paint to create a toxic environment that marine organisms will not grow on. Then there are the smooth surface coatings that create a surface, that when the boat is moving, the barnacles and organisms will not be able to attach themselves. 

Why Preventing Marine Growth is So Difficult? The Reason behind Formulation of Propeller Antifouling Technology

The reason it is so difficult to achieve a surface that marine organisms will not grow on is a result of the harsh environment under the waterline. 

Reasons Prevention of Marine Growth is Difficult?

• Dealing with multiple metal surfaces submerged in salt water
• Suspended solids in the water like dirt and salt that create friction and a sand blasting effect when the boat is running
• Friction from the prop spinning which creates a pressure washer type effect on the prop and running gear
• Galvanic corrosion can blow off coatings from the metal surfaces

Both conventional types of propeller antifouling do not perform or last as a result of this environment. Propeller antifouling paints and smooth surface coatings are soft so they are constantly getting worn down by friction or blown off by galvanic corrosion. These products are also subject to adhesion issues. Most require the metal surface to be sanded by heavy grit sand paper which removes a lot of material and reduces the life of the propeller. At the very least, both of these options also require the propellers to be completely sanded off and removed before a new application is applied which removes even more material. Most of the propeller antifouling paints contain biocides which contain more metals increasing galvanic corrosion.

Smooth surface propeller anti-fouling are made of wax or silicon which are very soft and every time a marine organism grows onto the surface and comes off it is taking some of the coating with it.

PropOne vs. PropSpeed: Which is the Best Propeller Antifouling Product – Know Here

It is widely accepted that a buildup of marine life on the surface of a boat’s propeller and drive shaft negatively impacts engine efficiency and performance. Even if the prop has a thin layer of growth on its surface area, fuel efficiency is reduced by a significant amount. To counter this problem, engineers have turned to developing super slick coatings. When the drive is engaged, and the prop begins to move, any organisms attempting to adhere to the prop simply slide right off. No chemicals are used to poison or kill the organisms in the environment. 

How do PropOne and PropSpeed Compare? Which Propeller Antifouling Technology Gives You the Most Bangs for Your Buck?

PropSpeed is much newer to the market than PropOne propeller antifouling coatings, but has been in development for over ten years. Being new to the slick coating market, PropSpeed appears to be able to avoid slipping into the same ruts that their competitors have. The biggest obstacle for PropOne is the cost. Comparing the two products at price point, PropSpeed is about 30% less expensive and offers 25% more product. That’s 2 strikes for PropOne right off the bat. PropOne is available in the following sizes: 1000ml, 500ml, and 250ml. On the other hand PropSpeed offers a size larger than PropOne’s 1000ml and still manages a lower cost. Also PropSpeed offers a size smaller than PropOne’s 250ml for sailboat owners who don’t need the larger quantities of product. 

In terms of performance, both slick propeller antifouling coatings are equally good. They do the job and do it well. It is too early to say which product will outlast the other in the minds of consumers. But for right now, PropSpeed is the recommended propeller antifouling technology as opposed to PropOne. The savings alone makes PropSpeed worth every penny. 

PropSpeed is one of the foul release systems that provide the best solution to keeping growth of your props and running gear. Though PropSpeed in reality don’t falls under the propeller antifouling technology category, it keeps the growth off by creating a super slippery surface that the marine growth cannot stick to. PropSpeed recommends that their kits by applied by a professional PropSpeed applicator. 

So, what you think? Which has the best propeller antifouling technique? At Get A Prop, we recommend you to choose PropSpeed over PropOne because it’s reliable, accurate and most importantly inexpensive to purchase.

Order your chosen propeller antifouling technology to bring the life of your boat back again which lets you stay worry-free about boat’s below the waterline surface.